AnekBond EP-40
Two-component epoxy adhesive for structural bonding
A thixotropic epoxy paste that bonds steel, concrete, stone, ceramics and most rigid plastics. Non-sag consistency lets it hold on vertical and overhead surfaces, making it the default choice for anchoring, patch bonding and structural repairs.
- Code
- EP-40
- Chemistry
- Two-component epoxy paste, 1:1 by volume
- Shelf life
- 18 months
Key features
- Bonds dissimilar substrates including steel-to-concrete
- Non-sag up to 15 mm bond thickness on vertical faces
- Resists water, dilute acids, alkalis and mineral oils
- Gap-filling with negligible shrinkage on cure
Recommended applications
- Rebar and threaded-bar anchoring
- Bonding precast and stone elements
- Structural crack and patch repair
- Machine and equipment part bonding
Technical specification
Values are typical for the product at 30 °C and 65% relative humidity. Site conditions will shift them — ask us for guidance on your specific environment.
| Property | Typical value |
|---|---|
| Mix ratio | 1 : 1 by volume (Part A : Part B) |
| Pot life @ 30 °C | 35 – 45 minutes |
| Compressive strength | > 70 N/mm² at 7 days |
| Tensile adhesion | > 3 N/mm² (concrete failure) |
| Service temperature | −20 °C to +80 °C |
| Full cure | 7 days at 30 °C |
Enquire about AnekBond EP-40
Send us your requirement and we will come back with pricing, lead time and the technical data sheet. Trial quantities are available for evaluation.
More from Adhesives & Sealants
View all
PRO X SEAL Wood Glue
Liquid wood adhesive — strong bond for all types of wood
A ready-to-use liquid wood adhesive for furniture assembly, laminate pressing and general joinery. It sets fast enough for a production line, resists moisture once cured, and dries to a bond line stronger than the timber around it.
PVAc wood adhesive, single component
AnekSeal PU-25
Elastic polyurethane sealant for construction joints
A single-component, moisture-curing polyurethane that cures to a tough, permanently elastic rubber. It absorbs cyclic movement in expansion joints without losing adhesion, and can be overpainted once skinned.
Single-component moisture-curing polyurethane
AnekSeal SIL-70
Neutral-cure silicone for glazing and wet areas
A neutral alkoxy-cure silicone that is non-corrosive to metals, mirror-safe and mould-resistant. Formulated for structural and weather-seal glazing as well as sanitary joints where fungal growth is a concern.
Single-component neutral alkoxy silicone