Catalogue
Reliable Chemical Solutions
Browse by division below. Each product page carries the full technical specification, packaging options and recommended applications.
Adhesives & Sealants
Structural and general-purpose bonding systems for wood, metal, glass, masonry and plastics, plus elastic sealants that keep joints watertight through thermal movement.
PRO X SEAL Wood Glue
Liquid wood adhesive — strong bond for all types of wood
A ready-to-use liquid wood adhesive for furniture assembly, laminate pressing and general joinery. It sets fast enough for a production line, resists moisture once cured, and dries to a bond line stronger than the timber around it.
PVAc wood adhesive, single component
AnekBond EP-40
Two-component epoxy adhesive for structural bonding
A thixotropic epoxy paste that bonds steel, concrete, stone, ceramics and most rigid plastics. Non-sag consistency lets it hold on vertical and overhead surfaces, making it the default choice for anchoring, patch bonding and structural repairs.
Two-component epoxy paste, 1:1 by volume
AnekSeal PU-25
Elastic polyurethane sealant for construction joints
A single-component, moisture-curing polyurethane that cures to a tough, permanently elastic rubber. It absorbs cyclic movement in expansion joints without losing adhesion, and can be overpainted once skinned.
Single-component moisture-curing polyurethane
AnekSeal SIL-70
Neutral-cure silicone for glazing and wet areas
A neutral alkoxy-cure silicone that is non-corrosive to metals, mirror-safe and mould-resistant. Formulated for structural and weather-seal glazing as well as sanitary joints where fungal growth is a concern.
Single-component neutral alkoxy silicone
AnekBond CA-10
Instant cyanoacrylate adhesive, medium viscosity
An ethyl cyanoacrylate that fixes in seconds on close-fitting parts. Medium viscosity gives enough working control for assembly line use while still wicking into tight joints.
Ethyl cyanoacrylate, single component
Waterproofing & Coatings
Liquid-applied membranes, cementitious slurries and protective coatings that keep water out of roofs, basements, wet areas and water-retaining structures — and keep corrosion off steel.
PRO X SEAL Liquid Rubber Sealant
All-purpose rubberised coating — stop leaks fast
A liquid rubber that goes on by brush, roller, dip or pour and cures to a seamless rubberised membrane. It seals out water, air and moisture on roofs, gutters, tanks and flashings, staying flexible through thermal movement instead of cracking.
Liquid rubber elastomeric coating, single component
AnekGuard PU-500
Liquid-applied polyurethane membrane
A single-component moisture-cured polyurethane that forms a seamless, fully bonded elastomeric membrane. Specified where the waterproofing must survive foot traffic, ponding water and heavy UV exposure.
Single-component moisture-curing polyurethane
AnekGuard CR-2K
Two-component flexible cementitious waterproofing
An acrylic-modified cementitious slurry supplied as a liquid polymer plus a cement-based powder. It bonds monolithically to concrete and masonry and can take tile adhesive directly over it, so wet-area build-ups stay thin.
Two-component polymer-modified cementitious slurry
AnekCoat EP-300
Solvent-free epoxy floor coating
A two-component, 100% solids epoxy that lays down a seamless, dust-free floor finish. Chemical and abrasion resistance make it standard for production halls, warehouses, labs and food plants.
Two-component solvent-free epoxy
AnekCoat ZP-90
Zinc-rich anti-corrosive primer
An epoxy primer loaded with 90% metallic zinc in the dry film. It protects structural steel galvanically — the zinc corrodes preferentially, so the steel underneath stays intact even where the film is scratched.
Two-component zinc-rich epoxy primer
Construction Chemicals
Concrete admixtures, non-shrink grouts, repair mortars, tile fixing systems and curing compounds that raise durability and cut rework on site.
AnekPlast SP-40
Polycarboxylate ether superplasticiser
A high-range water reducer built on PCE chemistry. It delivers extended slump retention at very low dosage, letting ready-mix and precast producers cut water content sharply without losing workability on long hauls.
Polycarboxylate ether, aqueous solution
AnekGrout NS-60
Non-shrink free-flow cementitious grout
A pre-blended cementitious grout that expands slightly on setting to guarantee full contact under base plates. Free-flow consistency lets it travel long distances under machinery without segregating or needing vibration.
Pre-blended cementitious powder, water-mixed
AnekFix TA-90
Polymer-modified tile adhesive, C2TE grade
A cement-based adhesive with redispersible polymer for fixing vitrified tiles, porcelain and natural stone. Extended open time and non-slip consistency make large-format tiling straightforward on both floors and walls.
Polymer-modified cementitious powder
AnekRepair MR-45
Micro-concrete for structural repair
A flowable, shrinkage-compensated micro-concrete poured into formwork to rebuild spalled columns, beams and slab soffits. It reaches structural strength without vibration, which matters in congested reinforcement.
Pre-blended micro-concrete, water-mixed
AnekCure WC-10
Wax-based concrete curing compound
A sprayed membrane that seals moisture into fresh concrete, replacing water ponding and hessian curing. It cuts plastic shrinkage cracking and frees up labour and water on large pours.
Wax emulsion, single component
AnekBond SBR Latex
SBR bonding agent and mortar modifier
A styrene-butadiene rubber latex used two ways: as a bonding slurry between old and new concrete, and as a gauging liquid that turns ordinary sand-cement mortar into a tough, low-permeability repair mortar.
Styrene-butadiene rubber latex emulsion
Industrial & Specialty Chemicals
Solvents, surfactants, cleaning concentrates and water-treatment chemistry supplied in bulk to formulators, processors and maintenance teams, with a certificate of analysis on every batch.
AnekSol IPA-99
Isopropyl alcohol, 99.9% technical grade
High-purity isopropyl alcohol supplied in drums and bulk to electronics, pharmaceutical and coatings manufacturers. Every batch ships with a certificate of analysis covering purity, water content and non-volatile residue.
Anhydrous solvent, 99.9% min purity
AnekClean AD-20
Alkaline degreaser concentrate
A built alkaline concentrate that strips oil, grease and carbon deposits from ferrous metal. Dilutable from 1:5 to 1:40 depending on soil load, so one drum covers everything from soak tanks to routine floor washing.
Alkaline aqueous concentrate
AnekSurf AES-70
Sodium lauryl ether sulphate, 70% paste
A primary anionic surfactant supplied as a 70% active paste to detergent and personal-care formulators. It provides the foam, wetting and detergency backbone of shampoos, dishwash liquids and hard-surface cleaners.
Anionic surfactant, 70% active paste
AnekTreat BW-15
Boiler water treatment and oxygen scavenger
A blended treatment that scavenges dissolved oxygen, conditions sludge and holds boiler feedwater in the correct alkalinity band. Continuous dosing protects tubes from pitting corrosion and keeps scale off heat transfer surfaces.
Blended aqueous treatment chemical