5 products
Waterproofing & Coatings
Liquid-applied membranes, cementitious slurries and protective coatings that keep water out of roofs, basements, wet areas and water-retaining structures — and keep corrosion off steel.
PRO X SEAL Liquid Rubber Sealant
All-purpose rubberised coating — stop leaks fast
A liquid rubber that goes on by brush, roller, dip or pour and cures to a seamless rubberised membrane. It seals out water, air and moisture on roofs, gutters, tanks and flashings, staying flexible through thermal movement instead of cracking.
Liquid rubber elastomeric coating, single component
AnekGuard PU-500
Liquid-applied polyurethane membrane
A single-component moisture-cured polyurethane that forms a seamless, fully bonded elastomeric membrane. Specified where the waterproofing must survive foot traffic, ponding water and heavy UV exposure.
Single-component moisture-curing polyurethane
AnekGuard CR-2K
Two-component flexible cementitious waterproofing
An acrylic-modified cementitious slurry supplied as a liquid polymer plus a cement-based powder. It bonds monolithically to concrete and masonry and can take tile adhesive directly over it, so wet-area build-ups stay thin.
Two-component polymer-modified cementitious slurry
AnekCoat EP-300
Solvent-free epoxy floor coating
A two-component, 100% solids epoxy that lays down a seamless, dust-free floor finish. Chemical and abrasion resistance make it standard for production halls, warehouses, labs and food plants.
Two-component solvent-free epoxy
AnekCoat ZP-90
Zinc-rich anti-corrosive primer
An epoxy primer loaded with 90% metallic zinc in the dry film. It protects structural steel galvanically — the zinc corrodes preferentially, so the steel underneath stays intact even where the film is scratched.
Two-component zinc-rich epoxy primer
Where this division is used
Not sure which product fits your application?
Describe the substrate, exposure and site conditions. Our technical team will recommend a system and send the data sheet.