AnekBond CA-10
Instant cyanoacrylate adhesive, medium viscosity
An ethyl cyanoacrylate that fixes in seconds on close-fitting parts. Medium viscosity gives enough working control for assembly line use while still wicking into tight joints.
- Code
- CA-10
- Chemistry
- Ethyl cyanoacrylate, single component
- Shelf life
- 12 months refrigerated
Key features
- Fixture strength in 5–20 seconds on most substrates
- Bonds rubber, plastics, metal, ceramic and leather
- Medium viscosity resists run-off on vertical parts
- Single-component — no mixing or measuring
Recommended applications
- Electronics and small component assembly
- Rubber gasket and O-ring bonding
- Footwear and leather goods
- Rapid repair of ceramics and rigid plastics
Technical specification
Values are typical for the product at 30 °C and 65% relative humidity. Site conditions will shift them — ask us for guidance on your specific environment.
| Property | Typical value |
|---|---|
| Base | Ethyl cyanoacrylate |
| Viscosity @ 25 °C | 90 – 130 cps |
| Fixture time | 5 – 20 seconds |
| Gap fill | Up to 0.15 mm |
| Shear strength | 18 – 25 N/mm² on steel |
| Service temperature | −30 °C to +80 °C |
Enquire about AnekBond CA-10
Send us your requirement and we will come back with pricing, lead time and the technical data sheet. Trial quantities are available for evaluation.
More from Adhesives & Sealants
View all
PRO X SEAL Wood Glue
Liquid wood adhesive — strong bond for all types of wood
A ready-to-use liquid wood adhesive for furniture assembly, laminate pressing and general joinery. It sets fast enough for a production line, resists moisture once cured, and dries to a bond line stronger than the timber around it.
PVAc wood adhesive, single component
AnekBond EP-40
Two-component epoxy adhesive for structural bonding
A thixotropic epoxy paste that bonds steel, concrete, stone, ceramics and most rigid plastics. Non-sag consistency lets it hold on vertical and overhead surfaces, making it the default choice for anchoring, patch bonding and structural repairs.
Two-component epoxy paste, 1:1 by volume
AnekSeal PU-25
Elastic polyurethane sealant for construction joints
A single-component, moisture-curing polyurethane that cures to a tough, permanently elastic rubber. It absorbs cyclic movement in expansion joints without losing adhesion, and can be overpainted once skinned.
Single-component moisture-curing polyurethane