Jet Solvent uPVC
Medium-bodied solvent cement for uPVC pressure pipe
A medium-bodied cement that softens the mating surfaces of uPVC pipe and fitting so they fuse into one continuous joint. Body is high enough to bridge the tolerance gap on loose sockets, and the joint can be pressure tested the next day.
- Code
- JS-UPVC
- Chemistry
- PVC resin in solvent blend, medium bodied
- Shelf life
- 24 months in sealed tins
Key features
- Fuses pipe and fitting into a single homogeneous joint
- Medium bodied - takes up the gap on loose-fitting sockets
- Clear film leaves a clean joint on exposed pipework
- Suitable for pipe sizes up to 110 mm
Recommended applications
- Cold water supply and plumbing risers
- uPVC pressure fittings and manifolds
- Agricultural and irrigation lines
- Pump and borewell delivery pipework
Technical specification
Values are typical for the product at 30 °C and 65% relative humidity. Site conditions will shift them - ask us for guidance on your specific environment.
| Property | Typical value |
|---|---|
| Base | PVC resin in THF / cyclohexanone blend |
| Colour | Clear |
| Body | Medium bodied |
| Viscosity @ 27 °C | 500 - 1,000 cps |
| Set time (handling) | 15 - 30 minutes |
| Pressure test after | 24 hours at 27 °C |
Enquire about Jet Solvent uPVC
Send us your requirement and we will come back with pricing, lead time and the technical data sheet. Trial quantities are available for evaluation.
More from Adhesives & Sealants
View allJetcol Clear Glue
Transparent multipurpose adhesive - dries clear, stays waterproof
A ready-to-use clear adhesive for the jobs where a white glue line would show. It grabs quickly on paper, board, fabric, leather, cork, wood and most rigid plastics, dries to an invisible film and stays waterproof once cured, so the bond survives damp and washing.
Waterproof synthetic resin adhesive, single component
Jetcol Wood Glue
Liquid wood adhesive - strong bond for all types of wood
A ready-to-use liquid wood adhesive for furniture assembly, laminate pressing and general joinery. It sets fast enough for a production line, resists moisture once cured, and dries to a bond line stronger than the timber around it.
PVAc wood adhesive, single component
JetX Epoxy
Two-component epoxy adhesive for structural bonding
A thixotropic epoxy paste that bonds steel, concrete, stone, ceramics and most rigid plastics. Non-sag consistency lets it hold on vertical and overhead surfaces, making it the default choice for anchoring, patch bonding and structural repairs.
Two-component epoxy paste, 1:1 by volume