JetX Epoxy
Two-component epoxy adhesive for structural bonding
A thixotropic epoxy paste that bonds steel, concrete, stone, ceramics and most rigid plastics. Non-sag consistency lets it hold on vertical and overhead surfaces, making it the default choice for anchoring, patch bonding and structural repairs.
- Code
- JX-EP
- Chemistry
- Two-component epoxy paste, 1:1 by volume
- Shelf life
- 18 months
Key features
- Bonds dissimilar substrates including steel-to-concrete
- Non-sag up to 15 mm bond thickness on vertical faces
- Resists water, dilute acids, alkalis and mineral oils
- Gap-filling with negligible shrinkage on cure
Recommended applications
- Rebar and threaded-bar anchoring
- Bonding precast and stone elements
- Structural crack and patch repair
- Machine and equipment part bonding
Technical specification
Values are typical for the product at 30 °C and 65% relative humidity. Site conditions will shift them - ask us for guidance on your specific environment.
| Property | Typical value |
|---|---|
| Mix ratio | 1 : 1 by volume (Part A : Part B) |
| Pot life @ 30 °C | 35 - 45 minutes |
| Compressive strength | > 70 N/mm² at 7 days |
| Tensile adhesion | > 3 N/mm² (concrete failure) |
| Service temperature | -20 °C to +80 °C |
| Full cure | 7 days at 30 °C |
Enquire about JetX Epoxy
Send us your requirement and we will come back with pricing, lead time and the technical data sheet. Trial quantities are available for evaluation.
More from Adhesives & Sealants
View allJetcol Clear Glue
Transparent multipurpose adhesive - dries clear, stays waterproof
A ready-to-use clear adhesive for the jobs where a white glue line would show. It grabs quickly on paper, board, fabric, leather, cork, wood and most rigid plastics, dries to an invisible film and stays waterproof once cured, so the bond survives damp and washing.
Waterproof synthetic resin adhesive, single component
Jetcol Wood Glue
Liquid wood adhesive - strong bond for all types of wood
A ready-to-use liquid wood adhesive for furniture assembly, laminate pressing and general joinery. It sets fast enough for a production line, resists moisture once cured, and dries to a bond line stronger than the timber around it.
PVAc wood adhesive, single component
Jetquick Super Glue
Instant cyanoacrylate adhesive, medium viscosity
An ethyl cyanoacrylate that fixes in seconds on close-fitting parts. Medium viscosity gives enough working control for assembly line use while still wicking into tight joints.
Ethyl cyanoacrylate, single component