Jetquick Super Glue
Instant cyanoacrylate adhesive, medium viscosity
An ethyl cyanoacrylate that fixes in seconds on close-fitting parts. Medium viscosity gives enough working control for assembly line use while still wicking into tight joints.
- Code
- JQ-SG
- Chemistry
- Ethyl cyanoacrylate, single component
- Shelf life
- 12 months refrigerated
Key features
- Fixture strength in 5-20 seconds on most substrates
- Bonds rubber, plastics, metal, ceramic and leather
- Medium viscosity resists run-off on vertical parts
- Single-component - no mixing or measuring
Recommended applications
- Electronics and small component assembly
- Rubber gasket and O-ring bonding
- Footwear and leather goods
- Rapid repair of ceramics and rigid plastics
Technical specification
Values are typical for the product at 30 °C and 65% relative humidity. Site conditions will shift them - ask us for guidance on your specific environment.
| Property | Typical value |
|---|---|
| Base | Ethyl cyanoacrylate |
| Viscosity @ 25 °C | 90 - 130 cps |
| Fixture time | 5 - 20 seconds |
| Gap fill | Up to 0.15 mm |
| Shear strength | 18 - 25 N/mm² on steel |
| Service temperature | -30 °C to +80 °C |
Enquire about Jetquick Super Glue
Send us your requirement and we will come back with pricing, lead time and the technical data sheet. Trial quantities are available for evaluation.
More from Adhesives & Sealants
View allJetcol Clear Glue
Transparent multipurpose adhesive - dries clear, stays waterproof
A ready-to-use clear adhesive for the jobs where a white glue line would show. It grabs quickly on paper, board, fabric, leather, cork, wood and most rigid plastics, dries to an invisible film and stays waterproof once cured, so the bond survives damp and washing.
Waterproof synthetic resin adhesive, single component
Jetcol Wood Glue
Liquid wood adhesive - strong bond for all types of wood
A ready-to-use liquid wood adhesive for furniture assembly, laminate pressing and general joinery. It sets fast enough for a production line, resists moisture once cured, and dries to a bond line stronger than the timber around it.
PVAc wood adhesive, single component
JetX Epoxy
Two-component epoxy adhesive for structural bonding
A thixotropic epoxy paste that bonds steel, concrete, stone, ceramics and most rigid plastics. Non-sag consistency lets it hold on vertical and overhead surfaces, making it the default choice for anchoring, patch bonding and structural repairs.
Two-component epoxy paste, 1:1 by volume