AnekFix TA-90
Polymer-modified tile adhesive, C2TE grade
A cement-based adhesive with redispersible polymer for fixing vitrified tiles, porcelain and natural stone. Extended open time and non-slip consistency make large-format tiling straightforward on both floors and walls.
- Code
- TA-90
- Chemistry
- Polymer-modified cementitious powder
- Shelf life
- 9 months
Key features
- C2TE classification — high bond, extended open time
- Non-slip: large tiles hold position on vertical surfaces
- Bonds vitrified and porcelain tiles with near-zero porosity
- Suitable for tile-on-tile over sound existing surfaces
Recommended applications
- Vitrified, porcelain and ceramic tiling
- Natural stone and large-format slabs
- Wet areas over cementitious waterproofing
- Tile-on-tile renovation work
Technical specification
Values are typical for the product at 30 °C and 65% relative humidity. Site conditions will shift them — ask us for guidance on your specific environment.
| Property | Typical value |
|---|---|
| Classification | C2TE to EN 12004 |
| Water demand | 6.0 – 6.5 litres per 20 kg bag |
| Tensile adhesion | > 1.0 N/mm² |
| Open time | > 30 minutes |
| Pot life | 3 – 4 hours |
| Coverage | 3.5 – 4.5 kg/m² with 6 mm notch |
Enquire about AnekFix TA-90
Send us your requirement and we will come back with pricing, lead time and the technical data sheet. Trial quantities are available for evaluation.
More from Construction Chemicals
View allAnekPlast SP-40
Polycarboxylate ether superplasticiser
A high-range water reducer built on PCE chemistry. It delivers extended slump retention at very low dosage, letting ready-mix and precast producers cut water content sharply without losing workability on long hauls.
Polycarboxylate ether, aqueous solution
AnekGrout NS-60
Non-shrink free-flow cementitious grout
A pre-blended cementitious grout that expands slightly on setting to guarantee full contact under base plates. Free-flow consistency lets it travel long distances under machinery without segregating or needing vibration.
Pre-blended cementitious powder, water-mixed
AnekRepair MR-45
Micro-concrete for structural repair
A flowable, shrinkage-compensated micro-concrete poured into formwork to rebuild spalled columns, beams and slab soffits. It reaches structural strength without vibration, which matters in congested reinforcement.
Pre-blended micro-concrete, water-mixed