AnekGrout NS-60
Non-shrink free-flow cementitious grout
A pre-blended cementitious grout that expands slightly on setting to guarantee full contact under base plates. Free-flow consistency lets it travel long distances under machinery without segregating or needing vibration.
- Code
- NS-60
- Chemistry
- Pre-blended cementitious powder, water-mixed
- Shelf life
- 9 months
Key features
- Controlled positive expansion — no shrinkage voids
- Free-flow at 45–60 seconds cone flow
- 60 N/mm² compressive strength at 28 days
- Factory pre-blended — only clean water added on site
Recommended applications
- Machine base plates and turbine foundations
- Anchor bolt and holding-down bolt pockets
- Bearing plates on bridges and precast connections
- Filling voids under column bases
Technical specification
Values are typical for the product at 30 °C and 65% relative humidity. Site conditions will shift them — ask us for guidance on your specific environment.
| Property | Typical value |
|---|---|
| Water demand | 3.5 – 4.5 litres per 25 kg bag |
| Compressive strength (1 day) | > 25 N/mm² |
| Compressive strength (28 day) | > 60 N/mm² |
| Expansion | 0.2 – 4 % (restrained) |
| Flow | 45 – 60 seconds (flow cone) |
| Working time | 30 minutes at 30 °C |
Enquire about AnekGrout NS-60
Send us your requirement and we will come back with pricing, lead time and the technical data sheet. Trial quantities are available for evaluation.
More from Construction Chemicals
View allAnekPlast SP-40
Polycarboxylate ether superplasticiser
A high-range water reducer built on PCE chemistry. It delivers extended slump retention at very low dosage, letting ready-mix and precast producers cut water content sharply without losing workability on long hauls.
Polycarboxylate ether, aqueous solution
AnekFix TA-90
Polymer-modified tile adhesive, C2TE grade
A cement-based adhesive with redispersible polymer for fixing vitrified tiles, porcelain and natural stone. Extended open time and non-slip consistency make large-format tiling straightforward on both floors and walls.
Polymer-modified cementitious powder
AnekRepair MR-45
Micro-concrete for structural repair
A flowable, shrinkage-compensated micro-concrete poured into formwork to rebuild spalled columns, beams and slab soffits. It reaches structural strength without vibration, which matters in congested reinforcement.
Pre-blended micro-concrete, water-mixed