AnekBond SBR Latex
SBR bonding agent and mortar modifier
A styrene-butadiene rubber latex used two ways: as a bonding slurry between old and new concrete, and as a gauging liquid that turns ordinary sand-cement mortar into a tough, low-permeability repair mortar.
- Code
- SBR-100
- Chemistry
- Styrene-butadiene rubber latex emulsion
- Shelf life
- 12 months
Key features
- Bonds new concrete and mortar to old substrates
- Cuts water permeability of modified mortars sharply
- Improves flexural and tensile strength of repair mixes
- Resists re-emulsification once cured
Recommended applications
- Bond coat before plastering or screeding
- Polymer-modified repair and patch mortars
- Waterproof rendering on masonry
- Floor screed toppings and levelling
Technical specification
Values are typical for the product at 30 °C and 65% relative humidity. Site conditions will shift them — ask us for guidance on your specific environment.
| Property | Typical value |
|---|---|
| Base | Styrene-butadiene copolymer latex |
| Solid content | 45 ± 2 % |
| Specific gravity | 1.02 ± 0.02 |
| pH | 9.0 – 10.5 |
| Bond coat dosage | 1 part SBR : 1 part water : 2 parts cement |
| Mortar dosage | 5 – 10 % by weight of cement |
Enquire about AnekBond SBR Latex
Send us your requirement and we will come back with pricing, lead time and the technical data sheet. Trial quantities are available for evaluation.
More from Construction Chemicals
View allAnekPlast SP-40
Polycarboxylate ether superplasticiser
A high-range water reducer built on PCE chemistry. It delivers extended slump retention at very low dosage, letting ready-mix and precast producers cut water content sharply without losing workability on long hauls.
Polycarboxylate ether, aqueous solution
AnekGrout NS-60
Non-shrink free-flow cementitious grout
A pre-blended cementitious grout that expands slightly on setting to guarantee full contact under base plates. Free-flow consistency lets it travel long distances under machinery without segregating or needing vibration.
Pre-blended cementitious powder, water-mixed
AnekFix TA-90
Polymer-modified tile adhesive, C2TE grade
A cement-based adhesive with redispersible polymer for fixing vitrified tiles, porcelain and natural stone. Extended open time and non-slip consistency make large-format tiling straightforward on both floors and walls.
Polymer-modified cementitious powder