AnekCure WC-10
Wax-based concrete curing compound
A sprayed membrane that seals moisture into fresh concrete, replacing water ponding and hessian curing. It cuts plastic shrinkage cracking and frees up labour and water on large pours.
- Code
- WC-10
- Chemistry
- Wax emulsion, single component
- Shelf life
- 12 months
Key features
- Retains over 90% of mix water for full hydration
- Eliminates ponding, hessian and continuous water curing
- Reduces plastic shrinkage cracking on large slabs
- One spray application immediately after finishing
Recommended applications
- Industrial floor slabs and pavements
- Bridge decks and runway concrete
- Precast yard curing
- Canal linings and large surface pours
Technical specification
Values are typical for the product at 30 °C and 65% relative humidity. Site conditions will shift them — ask us for guidance on your specific environment.
| Property | Typical value |
|---|---|
| Base | Wax emulsion in water |
| Appearance | White liquid, dries translucent |
| Specific gravity | 1.00 ± 0.02 |
| Water retention | > 90 % to ASTM C309 |
| Coverage | 4 – 6 m² per litre |
| Drying time | 1 – 2 hours |
Enquire about AnekCure WC-10
Send us your requirement and we will come back with pricing, lead time and the technical data sheet. Trial quantities are available for evaluation.
More from Construction Chemicals
View allAnekPlast SP-40
Polycarboxylate ether superplasticiser
A high-range water reducer built on PCE chemistry. It delivers extended slump retention at very low dosage, letting ready-mix and precast producers cut water content sharply without losing workability on long hauls.
Polycarboxylate ether, aqueous solution
AnekGrout NS-60
Non-shrink free-flow cementitious grout
A pre-blended cementitious grout that expands slightly on setting to guarantee full contact under base plates. Free-flow consistency lets it travel long distances under machinery without segregating or needing vibration.
Pre-blended cementitious powder, water-mixed
AnekFix TA-90
Polymer-modified tile adhesive, C2TE grade
A cement-based adhesive with redispersible polymer for fixing vitrified tiles, porcelain and natural stone. Extended open time and non-slip consistency make large-format tiling straightforward on both floors and walls.
Polymer-modified cementitious powder