AnekGuard CR-2K
Two-component flexible cementitious waterproofing
An acrylic-modified cementitious slurry supplied as a liquid polymer plus a cement-based powder. It bonds monolithically to concrete and masonry and can take tile adhesive directly over it, so wet-area build-ups stay thin.
- Code
- CR-2K
- Chemistry
- Two-component polymer-modified cementitious slurry
- Shelf life
- 12 months
Key features
- Bonds monolithically — resists negative water pressure
- Tileable directly, no screed or protective render needed
- Non-toxic; suitable for potable water structures
- Brush, roller or spray applied on damp substrates
Recommended applications
- Basements and retaining walls
- Toilet, bathroom and kitchen sunken slabs
- Overhead and underground water tanks
- Swimming pools and water features
Technical specification
Values are typical for the product at 30 °C and 65% relative humidity. Site conditions will shift them — ask us for guidance on your specific environment.
| Property | Typical value |
|---|---|
| Mix ratio | 1 : 2 (liquid : powder) by weight |
| Pot life @ 30 °C | 45 – 60 minutes |
| Coverage | 1.4 – 1.8 kg/m² in two coats |
| Crack bridging | Up to 1 mm |
| Positive water pressure | Resists 5 bar |
| Negative water pressure | Resists 3 bar |
Enquire about AnekGuard CR-2K
Send us your requirement and we will come back with pricing, lead time and the technical data sheet. Trial quantities are available for evaluation.
More from Waterproofing & Coatings
View all
PRO X SEAL Liquid Rubber Sealant
All-purpose rubberised coating — stop leaks fast
A liquid rubber that goes on by brush, roller, dip or pour and cures to a seamless rubberised membrane. It seals out water, air and moisture on roofs, gutters, tanks and flashings, staying flexible through thermal movement instead of cracking.
Liquid rubber elastomeric coating, single component
AnekGuard PU-500
Liquid-applied polyurethane membrane
A single-component moisture-cured polyurethane that forms a seamless, fully bonded elastomeric membrane. Specified where the waterproofing must survive foot traffic, ponding water and heavy UV exposure.
Single-component moisture-curing polyurethane
AnekCoat EP-300
Solvent-free epoxy floor coating
A two-component, 100% solids epoxy that lays down a seamless, dust-free floor finish. Chemical and abrasion resistance make it standard for production halls, warehouses, labs and food plants.
Two-component solvent-free epoxy