PRO X SEAL Liquid Rubber Sealant
All-purpose rubberised coating — stop leaks fast
A liquid rubber that goes on by brush, roller, dip or pour and cures to a seamless rubberised membrane. It seals out water, air and moisture on roofs, gutters, tanks and flashings, staying flexible through thermal movement instead of cracking.
- Code
- PXS-LR
- Chemistry
- Liquid rubber elastomeric coating, single component
- Shelf life
- 12 months
Key features
- All-purpose rubberised coating — one product across many substrates
- Seals out water, air and moisture
- Creates a seamless watertight barrier with no laps or joints
- Apply by brush, roll, dip or pour
Recommended applications
- Exposed RCC roof slabs and terraces
- Gutters, downpipes and flashings
- Chajjas, parapets and sunshades
- Metal and asbestos roof sheeting
Technical specification
Values are typical for the product at 30 °C and 65% relative humidity. Site conditions will shift them — ask us for guidance on your specific environment.
| Property | Typical value |
|---|---|
| Colour | White |
| Solid content | 60 ± 2 % by weight |
| Elongation at break | > 300 % |
| Coverage | 1.0 – 1.2 m²/kg in two coats |
| Dry film thickness | 0.8 – 1.0 mm (two coats) |
| Recoat interval | 4 – 6 hours |
Enquire about PRO X SEAL Liquid Rubber Sealant
Send us your requirement and we will come back with pricing, lead time and the technical data sheet. Trial quantities are available for evaluation.
More from Waterproofing & Coatings
View allAnekGuard PU-500
Liquid-applied polyurethane membrane
A single-component moisture-cured polyurethane that forms a seamless, fully bonded elastomeric membrane. Specified where the waterproofing must survive foot traffic, ponding water and heavy UV exposure.
Single-component moisture-curing polyurethane
AnekGuard CR-2K
Two-component flexible cementitious waterproofing
An acrylic-modified cementitious slurry supplied as a liquid polymer plus a cement-based powder. It bonds monolithically to concrete and masonry and can take tile adhesive directly over it, so wet-area build-ups stay thin.
Two-component polymer-modified cementitious slurry
AnekCoat EP-300
Solvent-free epoxy floor coating
A two-component, 100% solids epoxy that lays down a seamless, dust-free floor finish. Chemical and abrasion resistance make it standard for production halls, warehouses, labs and food plants.
Two-component solvent-free epoxy