AnekGuard PU-500
Liquid-applied polyurethane membrane
A single-component moisture-cured polyurethane that forms a seamless, fully bonded elastomeric membrane. Specified where the waterproofing must survive foot traffic, ponding water and heavy UV exposure.
- Code
- PU-500
- Chemistry
- Single-component moisture-curing polyurethane
- Shelf life
- 9 months
Key features
- Withstands permanent ponding without re-emulsification
- Seamless and fully bonded — leaks cannot track under the film
- High tensile strength with over 400% elongation
- UV stable in exposed applications
Recommended applications
- Podium decks and terrace gardens
- Water tanks and reservoirs (with potable-grade topcoat)
- Wet areas, balconies and toilet sunken slabs
- Bridge decks under wearing course
Technical specification
Values are typical for the product at 30 °C and 65% relative humidity. Site conditions will shift them — ask us for guidance on your specific environment.
| Property | Typical value |
|---|---|
| Solid content | > 90 % |
| Tensile strength | > 5 N/mm² |
| Elongation at break | > 400 % |
| Coverage | 0.7 – 0.9 m²/kg for 1.2 mm DFT |
| Tack-free time | 4 – 6 hours |
| Service temperature | −30 °C to +90 °C |
Enquire about AnekGuard PU-500
Send us your requirement and we will come back with pricing, lead time and the technical data sheet. Trial quantities are available for evaluation.
More from Waterproofing & Coatings
View all
PRO X SEAL Liquid Rubber Sealant
All-purpose rubberised coating — stop leaks fast
A liquid rubber that goes on by brush, roller, dip or pour and cures to a seamless rubberised membrane. It seals out water, air and moisture on roofs, gutters, tanks and flashings, staying flexible through thermal movement instead of cracking.
Liquid rubber elastomeric coating, single component
AnekGuard CR-2K
Two-component flexible cementitious waterproofing
An acrylic-modified cementitious slurry supplied as a liquid polymer plus a cement-based powder. It bonds monolithically to concrete and masonry and can take tile adhesive directly over it, so wet-area build-ups stay thin.
Two-component polymer-modified cementitious slurry
AnekCoat EP-300
Solvent-free epoxy floor coating
A two-component, 100% solids epoxy that lays down a seamless, dust-free floor finish. Chemical and abrasion resistance make it standard for production halls, warehouses, labs and food plants.
Two-component solvent-free epoxy