AnekCoat ZP-90
Zinc-rich anti-corrosive primer
An epoxy primer loaded with 90% metallic zinc in the dry film. It protects structural steel galvanically — the zinc corrodes preferentially, so the steel underneath stays intact even where the film is scratched.
- Code
- ZP-90
- Chemistry
- Two-component zinc-rich epoxy primer
- Shelf life
- 12 months
Key features
- 90% metallic zinc in dry film for galvanic protection
- Protects at scratches and cut edges, not just intact film
- Compatible with epoxy and polyurethane topcoats
- Suitable for C4/C5 corrosivity environments
Recommended applications
- Structural steel in industrial plants
- Coastal and offshore steelwork
- Storage tanks and pipe racks
- Bridges, towers and transmission structures
Technical specification
Values are typical for the product at 30 °C and 65% relative humidity. Site conditions will shift them — ask us for guidance on your specific environment.
| Property | Typical value |
|---|---|
| Zinc content | 90 % in dry film |
| Volume solids | 62 ± 2 % |
| Recommended DFT | 60 – 80 µm per coat |
| Theoretical coverage | 8 – 10 m²/litre at 70 µm |
| Surface prep | Abrasive blast to Sa 2½ |
| Overcoat interval | 6 hours minimum |
Enquire about AnekCoat ZP-90
Send us your requirement and we will come back with pricing, lead time and the technical data sheet. Trial quantities are available for evaluation.
More from Waterproofing & Coatings
View all
PRO X SEAL Liquid Rubber Sealant
All-purpose rubberised coating — stop leaks fast
A liquid rubber that goes on by brush, roller, dip or pour and cures to a seamless rubberised membrane. It seals out water, air and moisture on roofs, gutters, tanks and flashings, staying flexible through thermal movement instead of cracking.
Liquid rubber elastomeric coating, single component
AnekGuard PU-500
Liquid-applied polyurethane membrane
A single-component moisture-cured polyurethane that forms a seamless, fully bonded elastomeric membrane. Specified where the waterproofing must survive foot traffic, ponding water and heavy UV exposure.
Single-component moisture-curing polyurethane
AnekGuard CR-2K
Two-component flexible cementitious waterproofing
An acrylic-modified cementitious slurry supplied as a liquid polymer plus a cement-based powder. It bonds monolithically to concrete and masonry and can take tile adhesive directly over it, so wet-area build-ups stay thin.
Two-component polymer-modified cementitious slurry